| 60.25.0855.500.11.1503 Standard 5 Slewing Ring Bearings | Cap bolt, SAE grade:8; Da:399.999 mm; A2:368.3 mm; RG:1 NPT; PG:1/4 NPT; P180°:285 kN; P60°:691 kN; Taconite seal:TER 165; R2:46.831 mm; H:473.075 mm; Ca:117.805 mm; L:831.85 mm; Stabilizing ring:SR-44-38; h:79.375 mm; S:4.763 mm; Initial grease fill:2749.95 g; P90°:414 kN; Pa:71.2 kN; P120°:260 kN; End plug (suffix Y):EPR 23; |
| 231.20.1000.503 Type 21/1200.1 Standard 5 Slewing Ring Bearings | P90°:111 kN; Cap bolt, SAE grade:5; H1:133.35 mm; Mass pillow block:47.2 kg; P180°:81.4 kN; h:46.831 mm; Ca:67.793 mm; Cap bolt:2 x 1-8 UNC; Cap bolt recommended tightening torque:400 N·m; Da:215.001 mm; A1:120.65 mm; ba:53.181 mm; P150°:66.7 kN; Max. speed for Taconite seal:725 r/min; PG:1/4 NPT; Pa:20.7 kN; J1:69.85 mm; R1:79.375 mm; Stabilizing ring:SR-24-20; RG:1/2 NPT; |
| 162.36.1800.891.41.1503 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:19900 N; Sealed Speed Rating n3:3000 rpm; d:95.000 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; B:13.00 mm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; D:120.0000 mm; Oil Speed Rating Open/Shielded n2:6000 rpm; Basic Static Radial Load Rating Co:21200 N; |
| 91.35.1802.990.11.1502 Standard 5 Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:1100 rpm; B:46.00 mm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:900 rpm; d:440.000 mm; Sealed Speed Rating n3:0 rpm; Basic Dynamic Radial Load Rating C:255000 N; D:540.0000 mm; Basic Static Radial Load Rating Co:405000 N; Fillet Radius ra:2.00 mm; |
| 230.20.0900.503 Type 21/1050. Standard 5 Slewing Ring Bearings | d1 ≈:110 mm; B2:20 mm; r3,4 min.:3 mm; B1:12 mm; Mass angle ring:0.61 kg; d:70 mm; |
| 161.25.1077.891.21.1503 Standard 5 Slewing Ring Bearings | N:14 mm; B:49.2 mm; T:51.7 mm; Basic static load rating C0:19 kN; Db:100 mm; A5:33.5 mm; J:144 mm; Bearing:YAR 208-108-2RF/VE49; Recommended tightening torque for grub screw:6.5 N·m; B4:8 mm; Fatigue load limit Pu:0.8 kN; s1:30.2 mm; A1:20 mm; d:38.1 mm; Hexagonal key size for grub screw N:3.969 mm; Recommended diameter for attachment bolts, mm G:12 mm; Recommended diameter for attachment bolts, inch G:0.5 in; |
| 92.30.1799.991.21.1502 Standard 5 Slewing Ring Bearings | Pu:1250 kN; D:340 mm; with cylindrical bore:1 000 min-1; with tapered bore:1 300 min-1; Grease:1680 kN; d:160 mm; rs (min):4 mm; B:114 mm; Oil:155.640 kN; Static (Cor):16.7 mm; Dynamic (Cr):9 mm; |
| 11.20.1385.000.11.1504 Standard 5 Slewing Ring Bearings | Da:289.999 mm; Ca:89.789 mm; Appropriate attachment bolt size G:1 in; Stabilizing ring:SR-32-0; Mass pillow block:94.3 kg; Max. speed for PosiTrac Plus seal:825 r/min; h:52.388 mm; L:558.8 mm; A2:222.25 mm; da:160 mm; P150°:78.3 kN; J1:95.25 mm; R2:33.337 mm; PG:1/4 NPT; Initial grease fill:793.8 g; P60°:226 kN; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 18; H:336.55 mm; Cap bolt:4 x 3/4-10 UNC; |
| 162.25.0886.890.11.1503 Standard 5 Slewing Ring Bearings | d1:150.813 mm; Threads per inch:8; B4:30.963 mm; B1:156.921 mm; d:170 mm; d3 max.:219.989 mm; Sleeve:S 134x5.15/16; Mass adapter sleeve assembly:9.55 kg; Hydraulic nut:HMVC 34E; G:169.139 mm; B:27.254 mm; |
| 231.21.1075.013 Type 21/1200.1 Standard 5 Slewing Ring Bearings | s:40.084 mm; J max.:282.575 mm; H2:57.15 mm; J min.:234.95 mm; B:102.394 mm; da:88.9 mm; A1:107.156 mm; S:0.794 mm; Attachment bolt diameter G:22.225 mm; Limiting speed:2300 r/min; H:192.088 mm; L:330.2 mm; A:80.963 mm; Basic dynamic load rating C:325 kN; H1:95.25 mm; Mass bearing unit:14.3 kg; |
| 281.30.1475.013 Type 110/1600.1 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:750000 N; D:460.0000 mm; Grease Speed Rating n1:1300 rpm; Basic Dynamic Radial Load Rating C:457000 N; Oil Speed Rating n2:1600 rpm; d:280.000 mm; B:63.00 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; |
| 61.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | RG:3/4 NPT; Cap bolt:7/8-9 UNC; H2:66.675 mm; H1:169.875 mm; S:4.763 mm; P60°:345 kN; End plug (suffix Y):EPR 18; Ca:89.789 mm; A1:158.75 mm; Bearing limiting speed:2800 r/min; Stabilizing ring:SR-32-0; Cap bolt recommended tightening torque:813.5 N·m; Da:289.999 mm; P180°:145 kN; R2:33.337 mm; P150°:120 kN; Pa:93.9 kN; Initial grease fill:793.8 g; A2:225.425 mm; Eye bolt:2 x 3/8-16 UNC; |