| No. | Brand | H | F | A | C | J | G | d | b |
| 294/1060 M | ISB | - | - | - | - | - | - | 35 | - |
| 292/950EM | SKF | - | - | 44.5 mm | - | - | M6x1 | 35 mm | - |
| ER1.14.0844.200-1STPN | ISB | - | - | - | - | - | - | 1.7712 in | - |
| 2P19019 | NTN | - | - | - | - | - | - | - | - |
| 294/850 M | ISB | - | - | - | - | - | - | - | - |
| K81206-TV | INA | - | - | - | - | - | - | - | - |
| K89456-M | INA | - | - | - | 31.85 kN | - | - | - | - |
| 22348VMKW33 | SNR | - | - | - | 12.8 kN | 90 mm | - | 19.05 mm | - |
| 29376-E1-MB | INA | - | - | - | - | - | M6x1 | - | - |
| 89460 | ISO | - | - | 50 mm | 14 kN | - | - | - | - |
| 232/850BK | NTN | - | - | - | - | - | - | - | - |
| 294/600 M | Toyana | - | - | - | - | - | - | - | - |
| 22316EMK | SNR | - | - | - | - | - | - | - | - |
| 29320 M | ISB | - | - | - | - | - | - | - | 29.8 mm |
| 22313EAW33 | SNR | - | - | - | - | - | - | - | - |
| RT621 | INA | - | - | - | - | - | - | - | - |
| RT10802 | NTN | - | - | - | - | 150 mm | - | 60 mm | - |
| 81213TN | SKF | - | - | 21 mm | - | - | - | 30 mm | - |
| 29434R | KOYO | - | - | - | - | - | - | 60 | - |
| 29348 M | ISO | - | - | - | - | - | - | - | - |
| K,81102TVP | KOYO | - | - | - | - | - | - | - | - |
| 24020EAW33 | SNR | - | - | - | - | - | - | - | - |
| 351175 C | ISB | - | - | - | - | - | - | - | - |
| 29436 E | SKF | - | - | 29.3 mm | - | - | R1/8" | 25.4 mm | - |
| T149 | Fersa | - | - | - | - | - | - | - | - |
| CRBS 908 V | IKO | 42.9 mm | - | - | - | 118 mm | - | - | - |
| 81222 | Toyana | - | - | - | - | - | - | - | - |
| 29417-M | NKE | - | - | - | - | - | - | - | - |
| NTN 29448 Thrust roller bearings | Unit, Type:Insert Bearing Unit; Basic Load Rating, Static Rating(N):29400; Bearing Inner Dia. Shape:Tapered hole adapter; Bearing Unit, Type:Pillow Type; Diameter series symbol:Medium Load; Accessory:With steel plate cov; Surface Treatment:No; B:63.5; |
| 180 mm x 360 mm x 39 mm KOYO 29436R Thrust roller bearings | L:100 mm; H2:93 mm; d1:51.1 mm; s1:36.3 mm; N:M12; Designation of bearing:EX207G2T20; C:25.7 kN; Weight:1.7 kg; S:18.8 mm; B1:51.1 mm; Size (mm):180 mm x 360 mm x 39 mm ; |
| SNR 23126EAW33 Thrust roller bearings | e:20 mm; N:14mm; Designation of housing:FLZ209-; T max.:200 °C; G:R1/8"; s1:20.6 mm; H3:105; T min.:-20 °C; Weight:1.95 kg; Recommended tightening torque for set screw:8 Nm; |
| KOYO K,81212LPB Thrust roller bearings | T max.:200 °C; N1:16 mm; Weight:0.87 kg; d1:32.4 mm; L3:51 mm; H1:76 mm; A:32 mm; N2:32 mm; SW:3 mm; L2:10 mm; |
| NKE K 81211-TVPB Thrust roller bearings | C1:12 mm; C0:71.5 kN; T min.:-40 °C; S:39.7 mm; T max.:100 °C; Weight:4.56 kg; Recommended tightening torque for set screw:33.9 Nm; SW:6.35 mm; r:2; B:96 mm; |
| 150,000 mm x 225,000 mm x 75 mm SNR 24030EAK30W33 Thrust roller bearings | Symbol of contact angle:A; Combination symbol:DF; Symbol of Bearing Ring Shape:No; Precision Grade Symbol:No; Size Standards:Metric System; Contact angle(Degree):30; Precision:Grade 0; I.D.(Ø):20; Bearing type symbol:No; Basic Dynamic Load Rating(N):23500; Size (mm):150,000 mm x 225,000 mm x 75 mm ; |
| 180 mm x 206 mm x 13 mm IKO CRBS 18013 V UU Thrust roller bearings | C0 - Static Radial Rating:567000 lbf; Series:M255400; Bearing Weight:30.70 Kg; G1 - Heat Generation Factor (Roller-Raceway):2301.3; C90 - Dynamic Radial Rating (90 million revolutions)4:73400 lbf; Db - Cup Backface Backing Diameter:378.97 mm; B - Cone Width:77.788 mm; r - Cup Backface To Clear Radius2:3.30 mm; G2 - Heat Generation Factor (Rib-Roller End):287.6; a - Effective Center Location3:-4.1 mm; |
| ISO 29268 M Thrust roller bearings | r - Outer Ring To Clear Radius3:0.6 mm; Limiting Speed (Grease):33360 rpm; R - Inner Ring To Clear Radius2:0.6 mm; Design Units:METRIC; da - Inner Ring Backing Diameter:29.900 mm; Contact Angle:25 º; D:47 mm; Da - Outer Ring Backing Diameter:42.600 mm; d:25 mm; do - Ball Diameter:6.350 mm; |
| INA 29376-E1-MB Thrust roller bearings | Dz:95 mm; Z:57.7 mm; A2:41 mm; B:41.2 mm; T max.:100 °C; e:10 mm; s1:20.6 mm; T min.:-20 °C; G:M6x1; H3:105; |
| INA 29472-E1-MB Thrust roller bearings | Note:This product line wa; Dimension H:4.3 in; Cor - Static Load Rating:186142 lbf; Series Type:Light Series; Bearing Type:Split Cylindrical Ex; Bolt Size:4 x M24; Maximum Speed:1220 rpm; Shaft Size:6-11/16 in; Bearing - Housing - Seal:LSE611BXHATL; Dimension L:7.7 in; |
| KOYO K,81104TVP Thrust roller bearings | Flange O.D. H(φ):77; Number of Bearings:Single; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Flange Shape:Round Type; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Type:Bearings with Housin; |
| INA RCT24-A Thrust roller bearings | d1:125.00 mm; Thread G:M140x2; Locknut:KML28; L:66.00 mm; C:24 mm; D3:165 mm; Weight:2.70 Kg; Lockwasher and Lockplates:MBL28; Appropriate Hydraulic Nut:HMV28; |
INA Needle Thrust Bearing, Bore 1.125 In - 4XFN7|TC1828
Looking for INA Needle Thrust Bearing, Bore 1.125 In (4XFN7)? Grainger's got your back. Price $4.55. Easy online ordering and next-day delivery available with
TC1828 | Thrust Roller Bearing | Roller Bearings | Bearings
TC1828 THRUST NEEDLE ROLLER BEARING ; THRUST 1-1/8 BORE 1 1-3/4 OD ... INA. Manufacturer Name. SCHAEFFLER GROUP. Minimum Buy Quantity
INA TC1828 | Eastern Industrial Automation
INA TC1828 Axial Needle Roller Bearing, 1-1/8 in Dia Bore, 1-3/4 in OD, 0.078 in W, 1/4 to 4-1/8 in Dia Shaft, Steel
Bearing TC1828 (INA) | Size and Specification | Bearings
Axial needle roller bearings TC1828. Bearing number : TC1828. Size (mm) : 28.575x44.45x1.984. Brand : INA. Bore Diameter (mm) : 28,575. Outer Diameter
INA TC1828 Thrust Roller and Cage, Steel Cage ...
INA TC1828 Thrust Roller and Cage, Steel Cage, Open End, Inch, 1-1/8" ID, 1-3/4" OD, 5/64" Width, 6500rpm Maximum Rotational Speed, 16300lbf Static Load
INA TC1828 Thrust Roller and Cage, Steel Cage, Open End
INA TC1828 Thrust Roller and Cage, Steel Cage, Open End, Inch, 1-1/8" ID, 1-3/4" OD, 5/64" Width, 6500rpm Maximum Rotational Speed, 16300lbf Static Load
INA TC1828 bearing | Brand Bearing Quote - Tritan bearings
Combined with the INA TC1828 bearing, INA TC1828 bearing has the most complete product outline in rolling bearing industry INA TC1828 bearing provide
Axial needle roller bearings TC1828 (Series TC)
Axial needle roller bearings TC1828 (Series. TC) single direction, to ABMA 21.2 - 1988, suitable for combination with axial bearing washers TWA, inch sizes
INA TC1828 bearing in Mauritania | Original Brand Bearing
105 products - INA TC1828 bearing in Mauritania are widely used in industrial drive, agriculture, compressors, motors and generators, construction, industrial fan,
INA TC1828 Thrust roller bearings Video