75 mm x 115 mm x 20 mm FAG N1015-K-M1-SP Cylindrical roller bearings

No.	Brand	s	U	G	H	L	A	b	C
HK5518	ISO	-	-	-	-	-	-	-	-
RS-5011	NSK	-	-	-	-	-	-	-	-
N204	Toyana	-	-	-	239.316 mm	-	-	-	-
SL192314	NBS	-	-	-	-	-	-	-	12 mm
90RIJ395	Timken	-	-	-	-	-	-	-	-
RN340-E-MPBX	FAG	-	-	-	-	-	-	-	-
N 2307	SIGMA	-	-	-	-	-	-	-	-
165RIF662	Timken	-	-	-	419.1 mm	-	-	-	-
NN3009	CYSD	-	-	-	-	-	-	-	-
190RJ51	Timken	-	-	-	-	137 mm	-	-	-
NF3236	Toyana	-	-	-	-	-	-	-	-
NUP309EM	NSK	-	-	-	182.166 mm	-	-	-	-
NP2932	Toyana	-	-	-	-	-	-	-	-
N321-E-M6	NKE	-	-	-	-	-	-	-	-
NNCF49/500-V	NKE	-	-	-	-	-	-	-	-
NUP2208	ISO	-	-	-	-	-	-	-	-
N420	Toyana	-	-	-	-	-	6.5 mm	-	-
NP3132	Toyana	-	-	-	-	-	-	10.5 mm	-
E-4R9211	NTN	-	-	-	28 mm	-	-	-	-
NU414	KOYO	-	-	-	-	-	-	-	-

95 mm x 170 mm x 32 mm ISB NUP 219 Cylindrical roller bearings	D:215 mm; Fatigue load limit Pu:3.25 kN; Mass bearing:12 kg; Calculation factor kr:0.05; d:100 mm; Basic dynamic load rating C:190 kN; da max.:130 mm; Limiting speed:4000 r/min; ra max.:3 mm; D1 ≈:183.3 mm; Size (mm):95 mm x 170 mm x 32 mm ;
190 mm x 340 mm x 55 mm NTN NJ238E Cylindrical roller bearings	J max.:279.4 mm; R2:21.431 mm; Cap bolt recommended tightening torque:298.3 N·m; Pa:7.83 kN; Appropriate attachment bolt size G:0.625 in; Initial grease fill:87.885 g; Adapter sleeve assembly:SNW 16x2.11/16; H2:31.75 mm; Mass pillow block:20.9 kg; P150°:44.5 kN; Size (mm):190 mm x 340 mm x 55 mm ;
155,575 mm x 342,9 mm x 79,375 mm NSK H936340/H936316 Cylindrical roller bearings	Grease Speed Rating Open/Shielded n1:4000 rpm; Basic Static Radial Load Rating Co:65500 N; d:105.000 mm; Fillet Radius ra:2.00 mm; B:26.00 mm; Basic Dynamic Radial Load Rating C:79300 N; Oil Speed Rating Open/Shielded n2:4800 rpm; D:160.0000 mm; Sealed Speed Rating n3:2400 rpm; Accessories:Snap-Ring; Size (mm):155,575 mm x 342,9 mm x 79,375 mm ;
240 mm x 320 mm x 48 mm SKF NCF2948CV Cylindrical roller bearings	Limiting speed for lubrication with:0 min-1; Static (Cor):38.2 mm; D:761 mm; Oil:7.520 kN; d:559 mm; Pu:232 kN; B2 B Dynamic (Cr):mm; Weight:0 min-1; Grease:425 kN; B1:36.5 mm; Size (mm):240 mm x 320 mm x 48 mm ;
Toyana NF3236 Cylindrical roller bearings	Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:4600 rpm; Oil Speed Rating Open/Shielded n2:5600 rpm; Fillet Radius ra:2.00 mm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:79200 N; B:29.00 mm; d:55.000 mm; Basic Static Radial Load Rating Co:65500 N;
ISO HK304016 Cylindrical roller bearings	Basic static load rating C0:26.5 kN; ra max.:0.3 mm; s max.:0.5 mm; D:35 mm; Fatigue load limit Pu:3.1 kN; r1,2 min.:0.3 mm; da:28.4 mm; Da:29.5 mm; d:20 mm; Basic dynamic load rating C:14.2 kN;
25 mm x 47 mm x 12 mm NTN NUP1005 Cylindrical roller bearings	Basic Dynamic Radial Load Rating C:117000 N; Fillet Radius ra:2.00 mm; d:60.000 mm; D:150.0000 mm; Oil Speed Rating Open/Shielded n2:4600 rpm; B:35.00 mm; Accessories:One Shield & Snap-Ri; Basic Static Radial Load Rating Co:102000 N; Grease Speed Rating Open/Shielded n1:3800 rpm; Size (mm):25 mm x 47 mm x 12 mm ;
120 mm x 260 mm x 55 mm NKE NJ324-E-MPA+HJ324-E Cylindrical roller bearings	N1:34.925 mm; Eye bolt:2 x 1/2-13 UNC; A1:203.2 mm; P120°:136 kN; H:422.275 mm; Cap bolt recommended tightening torque:271.2 N·m; P90°:218 kN; Housing:SAF 634; H1:209.55 mm; R2:42.862 mm; Size (mm):120 mm x 260 mm x 55 mm ;
45 mm x 100 mm x 25 mm NSK NUP309EM Cylindrical roller bearings	H:182.166 mm; PG:1/8 NPT; Ca:45.796 mm; Cap bolt recommended tightening torque:149.1 N·m; J1:53.975 mm; Mass pillow block:16.5 kg; End plug (suffix Y):EPR 9; Appropriate attachment bolt size G:0.625 in; P180°:25.4 kN; J max.:279.4 mm; Size (mm):45 mm x 100 mm x 25 mm ;
65 mm x 120 mm x 31 mm NKE NU2213-E-M6 Cylindrical roller bearings	D:26.0000 mm; Basic Dynamic Radial Load Rating C:2250 N; Sealed Speed Rating n3:16000 rpm; B:5.00 mm; d:17.000 mm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:1460 N; Grease Speed Rating Open/Shielded n1:24000 rpm; Oil Speed Rating Open/Shielded n2:30000 rpm; Accessories:One Shield; Size (mm):65 mm x 120 mm x 31 mm ;
55 mm x 120 mm x 43 mm KOYO NU2311 Cylindrical roller bearings	B:136 mm; C1:118.2 mm; r3,4 min.:0.6 mm; r min.:2 mm; Basic dynamic load rating C:1170 kN; Mass bearing:30.8 kg; -:0.2 mm; Ca1:110 mm; D3:274 mm; Snap ring Seeger:SW 280; Size (mm):55 mm x 120 mm x 43 mm ;
100,000 mm x 150,000 mm x 67,000 mm NTN SL04-5020LLNR Cylindrical roller bearings	D:870 mm; r3,4 min.:7.5 mm; b:22.3 mm; Reference speed:500 r/min; Basic dynamic load rating C:7810 kN; D1 ≈:751 mm; s max.:11.4 mm; K:12 mm; Fatigue load limit Pu:1220 kN; ra max.:6 mm; Size (mm):100,000 mm x 150,000 mm x 67,000 mm ;

N1015-K-M1-SP FAG • ABF Store

N1015-K-M1-SP FAG. Cylindrical roller bearings N10..-K-M1-SP, non-locating bearing, with tapered bore, taper 1:12, separable, with cage, reduced radial

Bearing N1015-K-M1-SP (FAG) | Size and Specification

Cylindrical roller bearings N1015-K-M1-SP. Bearing number : N1015-K-M1-SP. Size (mm) : 75x115x20. Brand : FAG. Bore Diameter (mm) : 75. Outer Diameter

Precision Radial Roller Bearing Ref. Fag N1015-k-m1-sp - Rodavigo

Precision radial roller bearings combine high capacity to withstand radial loads with high speed and turning accuracy.Super precision and high speed bearings

N1015-K-M1-SP FAG Bearing | N1015 bearing in Barbados

FAG N1015-K-M1-SP Bearing Packaging picture ... 24-hour consultation of NACHI N1015 bearing in Barbados. We can manufacture more than 40,000 series

FAG Bearing N1015-K-M1-SP can support high radial loads

Quality FAG Bearing manufacturers & exporter - buy FAG Bearing N1015-K-M1-SP can support high radial loads from China manufacturer

Bearing N1015-K-M1-SP / FAG 75x115x20 Single row

N1015-K-M1-SP / FAG - Single row cylindrical-roller bearing N1015-K-M1-SP Brand:FAG Size:75X115X20 d (inner diameter) 75 mm D (outer diameter) 115 mm

N1015-K-M1-SP-H139 FAG • ABF Store

N1015-K-M1-SP-H139 FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in